Question
How to make SRP-F310 printer speed faster?

Answer
1. Printing speed on SRP-F310 is 250mm/sec.
2. If the printing speed is late, it is available to adjust printer speed (Only for serial communication) .
3. Printing Speed (serial) could be changed by Dip S/W
4. Below is Dip switch on SRP-F310.

SW Function ON OFF Default
1-1 Auto-Cutter Selection Disable Enable OFF
1-2 Handshaking XON/XOFF DTR/DSR OFF
1-3 Data Length 7bits 8bits OFF
1-4 Parity Check Yes No OFF
1-5 Parity Selection EVEN ODD OFF
1-6 Baud Rate Selection (bps) Refer to the following table OFF
1-7 ON
1-8 OFF

• Table – Baud rate (bps) Selection

Transmission Speed SW 1-6 SW 1-7 SW 1-8 Default
2400 ON OFF OFF 9600
4800 ON OFF ON
9600 OFF ON OFF
19200 OFF OFF OFF
38400 OFF ON ON
57600 OFF OFF ON
115200 ON ON ON
5. When Dip switch setting is done, you need to change the printing speed in a driver property for proper printing. .