Question
I want to use this printer in the kitchen, how do I set the bell? The bell keeps ringing, how can I stop it?
Answer
1. Internal bell
1-1. STP-131 was designed with no internal bell.
1-2. Some sellers may install the internal bell. In this case, the internal bell will ring every time the printer is printing. There is no separate setting.
1-3. If you want to disable the internal bell, you should remove the internal bell from the board.
1-4. If you cannot remove the internal bell on your own, contact the seller and request them to remove the internal bell.
1-5. if you cannot reach the seller, contact Service Center who installs the internal bell and sells the product.
2. External bell (External bell setting is the same as Cash Drawer setting.)
2-1. Connect the external bell to the cash drawer port. (Location of the cash drawer: refer to the following picture.)
2-2. You should purchase the external bell separately, and be sure to check the Pin connection of the external bell when you purchase it.
2-3. When you connect the external bell, check the Open Cash Drawer of the additional command in Printer Driver Properties tab.
2-4. If the program sends the command directly to the printer without using the Windows driver, you should send the cash drawer open command to the printer.
2-5. If you are using a POS system without using the Windows driver, check the settings of the program for external bell operation.
* You should contact POS system developer, not the printer company with questions on POS system settings..
* Refer to the command manual for details on the cash drawer open command.
* The use of external bell is the same as cash drawer
